TASER® Device Information

We have tried to answer the questions you may have about the TASER X26C and TASER C2 series. Please read the frequently asked questions and answers below. If you have a question we have not answered, let us know and we will get the answer for you.

Back to the TASER Devices Page

HOW DOES A TASER DEVICE WORK?
Upon firing, compressed nitrogen projects two TASER probes 15 feet at a speed of 135 feet per second. An electrical signal transmits throughout the region where the probes make contact with the body or clothing. The result is an instant loss of the attacker’s neuromuscular control and any ability to perform coordinated action.

 Both the TASER X26C and TASER C2 uses an automatic timing mechanism to apply the electric charge. It then releases an electric current in a preset time sequence (an initial seven seconds followed by several 1.8 second breaks for a total time of about 30 seconds in each cycle). This cycle ensures that the nervous system of the target does not recover instantly to allow him to remove the probes. The follow-on bursts disrupt the process of re-equilibration of the nervous system. While the target is disabled, the user can place the device on the ground and escape.

HOW CAN THE TASER X26C or TASER C2 BE SO EFFECTIVE YET NON-INJURIOUS?
Both the  TASER X26C and TASER C2 does not depend upon impact or body penetration to achieve its effect. Its pulsating electrical output interferes with communication between the brain and the muscular system, resulting in loss of control. However, the shock is nondestructive to nerves, muscles and other body elements. It simply affects them in their natural mode. More importantly, no deaths have ever been directly attributed to the TASER Device .

WHAT HAS TESTING REVEALED REGARDING THE TASER DEVICE? Anesthesiologist and specialist in medical electronics, Dr. Frank Summers, MD of St. Joseph’s Hospital, Orange, California, directed tests of volunteers at St. Joseph’s in 1971 and 1974. Dr. Summers stated, "...We undertook this [volunteer test] in the operating rooms at St. Joseph’s Hospital. We had an assembly of cardiovascular surgeons, cardiologists... we had a real [TASER]. We tested extensively and made movies. The tests were impressive. We monitored all parameters of physiology, including electrocardiographs. The tests did not produce any lethal effects and we found that the background work that had been done did indeed pan out in practice."

DOES THE TASER DEVICE AFFECT THE HEART OR A CARDIAC PACEMAKER?
Both the TASER X26C and TASER C2’s output is well below the level established as "safe" by the federal government in approving such devices as the electrified cattle fence. In a medical study of the Model XR 5000 electronic stun gun, Dr. Robert Stratbucker of the University of Nebraska Medical Center confirmed that the T-Wave does not interrupt the heartbeat or damage a pacemaker. Any modern pacemaker is designed to withstand electrical defibrillator pulses that are hundreds of times stronger than either the TASER X26C or  TASER C2’s output. The current of 0.3 joules from both the TASER X26C and TASER C2 is well below the 10-50 joule threshold above which cardiac ventricular fibrillation can occur.

ISN’T HIGH VOLTAGE LETHAL?
High voltage, in itself, is not dangerous. One can receive a 25,000-volt shock of static electricity from a doorknob on a dry day without harm. The physiological effect of electrical shock is determined by: the current, its duration, and the power source that produces the shock. The typical household current of 110 volts is dangerous because it can pump many amperes of current throughout the body indefinitely. By contrast, both the TASER X26C and TASER C2 power supply uses batteries that are capable of supplying less than three watts of electrical power for a few minutes.

WILL THE TASER CAUSE ELECTROCUTION?
No. The output is metered by the electronics and the electrical energy in each pulse is always the same, regardless of the target condition. The electrical output will not be transferred from one person to another even if they touch. TASER International Inc.’s president has been stunned by an TASER Device while standing in water to emphasize this point.

WHAT ARE THE AFTER EFFECTS?
A person hit with either an TASER X26C or TASER C2 will feel dazed for several minutes. The pulsating electrical output causes involuntary muscle contractions and a resulting sense of vertigo. It can momentarily stun or render an attacker unconscious. Yet, the TASER Device’s low electrical amperage and short duration of pulsating current, ensures a non-lethal charge. Moreover, it does not cause permanent damage or long-term aftereffects to muscles, nerves or other body functions. A January 1987 Annals of Emergency Medicine study reported TASER Device technology leaves no long term injuries compared with 50% long term injuries for gun shot injuries.

MUST THE PROBES PENETRATE THE BODY TO BE EFFECTIVE?
No. The electrical current will "jump" up to two inches as long as both probes are attached to clothing or skin. At most, only the 3/8-inch needlepoint will penetrate the skin. They have less energy than a spring propelled BB.

WHAT IF THE PROBES MISS?
Both the  TASER X26C and TASER C2 can be used in a touch-stun mode. The user is thus provided with a final backup if the probes miss the target. Should the user miss or engage a second attacker, he can touch the unit directly to the target and it will work like a powerful touch-stun device. But you can also purchase additional  cartridges for a quick change and second shot.

WHAT IS THE BEST-SHOT AT MAXIMUM RANGE?
As long as the spread of the probes is at least six inches, both the  TASER X26C and TASER C2 will be extremely effective. To ensure that the spread is greater than six inches, both the  TASER X26C and  TASER C2 should be fired at a target several feet away. The optimum shot is from seven to ten feet away form the target to achieve maximum effect. At seven to ten feet away - the spread of the probes will be approximately 16 inches, ensuring that the target receives the most efficient T-Wave flow.

DOES TEMPERATURE HAVE A DETRIMENTAL EFFECT ON THE TASER Device? No. Both the TASER X26C and TASER C2 utilizes compressed nitrogen (an inert gas). The compressed air capsules have successfully held their charges at temperatures of minus 20º F and up to 160º F. Moreover, altitude will not adversely effect the firing. In addition, the temperature will not effect the T-Wave. However, as with any product containing polycarbonates and other thermoplastics, neither the TASER X26C, TASER C2 or their Air Cartridges should never be left in direct sunlight.

Back to the TASER Devices Page

TASER® is a registered trademark of TASER International, INC.